KTM50 PERFORMANCE PARTS

1/4 Turn Throttle Assembly

This throttle is a special High performance part made to the same spec, size, performance and design as "cobra" "Polini" "Lem" 1/4 throttle assemblies.

Includes: 1/4 throttle tube, 1/4 throttle assembly, throttle cap and grip set. Also includes a special throttle cable adjuster end. = This allows you to use your old throttle cable with a little modifying

KTM50 1/4 TURN THROTTLE ASSY.
Price: $29.99
Qty:

1/4 Turn Throttle Assembly & Performance 1/4 Turn Throttle Cable

This throttle is a special High performance part made to the same spec, size, performance and design as "cobra" "Polini" "Lem" 1/4 throttle assemblies.

Includes: 1/4 throttle tube, 1/4 throttle assembly, 1/4 throttle cable, throttle cap and grip set. Also includes a special throttle cable adjuster end. = This allows you to use your old throttle cable with a little modifying

***This kit includes the complete 1/4 Turn Throttle Assembly, and a new throttle cable designed for the 1/4 Turn Throttle.

PRO SENIOR $44.99

Qty:

PRO JUNIOR (Stock Carb) $44.99

Qty:

PRO JUNIOR (19/21mm Carb) $44.99

Qty:

1/4 Turn Throttle Cable

$12.99

PRO SENIOR

Qty:

PRO JUNIOR (Stock Carb)

Qty:

PRO JUNIOR (19/21mm Carb)

Qty:

Martin & Slater 19mm Carburetor

Made to the same size in scale to adapt to most all 50cc 2-stroke dirt bikes including KTM 50s, LEM 50s, Husky 50s, Cobra 50s and Polini 50s.  For example the KTM 50cc adventure, Pro Jr pro Sr., LEM LX1, LX2, LX3 R2 R3 lem Cayman, Polini X1 X3 or X5 and many other brands could benefit from adapting this larger carb for more POWER.

If your bike has a 19mm Dellorto carb this is a direct replacement and will bolt right on easy. It will use the same throttle cable and intake flange. the rear of this carb has threaded end for allow for small (KTM) or bigger (polini) style air filter and air boxes.
Awesome bolt-on power gain to replace any bike that was equipped with Dellorto 19MM or 14MM carbs! This carb has a Dellorto brand main jet and pilot jet. These Dellorto brand jets are made in Italy and can be found at many dealers around the USA. Other features include an adjustable air, idle screw and adjustable needle.
We also have a large inventory of Dellorto brand main jets, pilot jets, slides, needles, floats, gaskets, throttle cables, throttle assemblies and air filters available for fine tuning or replacement parts.

KTM50 19MM CARBURETOR
Price: $89.99
Qty:

KTM50 21MM CARBURETOR UPGRADE
Price: $89.99
Qty:

The best quality and performance available for KTM50s. Nitrogen charged oil dampened fully adjustable piggy back reseivor rear shock designed for KTM50s. Adjustable spring preload, adjustable rebound and adjustable compression make this the ideal choice of rear suspension for all types of riders weights and ability.
KTM50 Senior - 1997-2000
KTM50 Senior - 2001-2008*
KTM50 Senior - 2009-2010
*will also fit on Senior Adventure models
KTM50 Junior - 1997-2000
KTM50 Junior - 2001-2008*
KTM50 Junior - 2009-2010
* will also fit on Mini Adventure models
 

MSRP $499.99 

ON SALE NOW $275.99

KTM50 PERFORMANCE REAR SHOCK
Price: $275.99
Qty:

Martin & Slater Rear Shock Spare Parts

*PLEASE NOTE* These are made specifically for our Martin & Slater shocks. These parts cannot be used on standard KTM50 shocks!

Complete Rear Shock Rebuild Kit - $49.99

Qty:

Rear Shock Bushing Set (Includes Inner & Outer Bushing, Top and Bottom) - $26.99

Qty:

Rebound Adjuster Knob & Screw - $22.99

Qty:

Rear Shock Seal - $12.99

Qty:

Maxima Gear Oil
Maxima MTL 75wt Gear Oil

MAXIMA oil is what many factory teams like Pro-Circuit Kawasaki have been using for years. The MAXIMA MTL brand gear oil is the best oil recommended for all 50cc MX bikes.  

MAXIMA MTL 75wt. Gear Oil
Per Quart $7.99 SALE $5.99 Out of Stock - Please check back!
Per Case $71.99 SALE $59.99 Out of Stock - Please check back!
Steel Clutch Spring Washers
KTM50 STEEL SPRING WASHERS
Price: $29.99
Qty:
Size:

Stainless Steel Clutch Spring Washers

Stainless steel spring washers are considered a performance part, because they are not AMA stock class legal. Many people use these stainless washers because they are much stronger then the normal carbon spring washers.  They also resist fading better then standard carbon spring washers when the clutch heats up. Keep in mind that a these stainless spring washers will use a different stack compared to the standard steel spring washers. USA made STAINLESS STEEL Belleville spring washers.

KTM50 STAINLESS SPRING WASHERS
Price: $39.99
Qty:
Size:

KTM50 BRAKE PAD SET
Price: $16.99
Qty:

 
   

 

KTM50 TOOLS

KTM50 Clutch Puller $29.99

Remove or install the Clutch assembly or Flywheel with this special puller. This tool will safely pull these parts off your engine. 
Please do not try to use any other type of tool to remove these parts. Why? you ask.
It's because if you try to use force or pry with other tools you could break or damage something.  

This item is currently out of stock. Please check back at a later time.

KTM50 Piston Stop Tool $19.99

Remove or install the Clutch nut or Flywheel nut with this special piston stop. This tool safely keeps the engine from turning over. This allows for the correct torque to be set on these important engine parts.

Please do not use Air Impact Wrench on Clutch nut or Flywheel. Why? you ask

It's because you will not know how tight they are. Overtightening can strip the threads or even break the crankshaft. If the Air Wrench is too lose, the nut will fall off while the engine is running causing huge damage inside your engine.
KTM50 PISTON STOP TOOL
Price: $19.99
Qty:

All New - Aluminum Motorcycle Stands by Martin & Slater!

All Aluminum, Heavy Duty Construction.

Super Tall Work Platform

30" Tall, Foldable, Rubber Mat, Safety Tie-Downs

$99.99

Qty:

Full Size MX Stand

17" Tall, Great for all size bikes!

$49.99

Qty:

Currently Out Of Stock, Please Check Back!

Mini Race Stand

14" Tall, Perfect for 50cc & 65cc MX Bikes

$39.99

Qty: