      |
            |
 |
 |
KTM50 Adventure, Air Cooled Models |
||||||
|
KTM50 Adventure Complete Replacement Engine Retail: $549.99 SALE PRICE $479.99!
2002- 2008 KTM 50cc Mini & Senior Adventure complete replacement engine assembly.
Includes: Ignition System, Kick Start Lever, Reed Block & Intake Manifold Assembly. |
 |
|||
***These engines and short blocks previously have been completely assembled and bench run for under one minute to make sure it is up to standards and within tolerances. All factory KTM50 parts will bolt on to this short block without any modifications. All parts are made to the same spec, size, color, shape, dimensions, performance and quality as stock OEM. Does your KTM 50 need a bottom end rebuild? Now you can switch it out yourself, without having to pay a motorcycle shop expensive hourly labor rates. |
||||
|
|
|||
KTM50 Adventure Cylinder & Piston Kit This complete kit includes Cylinder, Head, Piston, Ring, Pin, Clips, Top End Bearing, Base Gasket, and Head Gasket. Regular Price was $199.99...NOW ON SALE FOR $139.99! Currently Out of Stock - Please Check Back. |
 |
|||
 |
KTM50 Ignition Kit |
|
KTM50 Adventure 3-Shoe Clutch |
|
KTM50 Adventure Clutch Basket & Bearing | |||
KTM50 Aftermarket Ignition System Assembly. Made to the same size, spec, performance, color and quality as the standard OEM parts.
Will fit all model KTM50s, years 2002+ and newer. Our high quality ignition system is of even better quality than OEM stock parts, which is why we offer a 30-day guarantee on our ignition system. *NOTE- If you have a 1994-2001 KTM50 with black "Morini Franco" engine, this will not fit. Any tech questions, please send an e-mail or call. This item fits KTM50s from 2001-2010. Kit includes Ignition Coil, Flywheel, and Stator Assembly. These parts are brand new. Guarantee covers replacement/exchange on defective parts. |
KTM50 3-Shoe Aftermarket Clutch Assembly.
Includes: center hub, shoes, spring washers, and clutch bolts. Comes with EXTRA set of QTY-50 USA made spring washers and complete instructions.
Stock clutch specs, will bolt right on to you Martin & Slater or KTM 2001 -2008 Pro Junior or Senior models. This is a brand new clutch, never used. I am told by many customers that this clutch is hit'in hard and hook'in up! Need tech advice email or call me. |
Includes: clutch basket and clutch center roller bearing; comes with complete clutch assembly instructions.
Does your clutch basket have grooves in it from excess clutch wear? Does your basket have wobble on the crankshaft? Or is your factory basket broken from one of the spot welds breaking? Replace your factory basket with this high quality replacement part. ***IMPORTANT NOTE*** This clutch basket has a 360° weld around the center hole, unlike the standard early model Pro SR and Pro JR that only had spot welds. This makes our clutch basket very strong and reliable under the most extreme racing conditions. |
||||||
|
|
KTM50 Ignition Coil |
|
KTM50 Ignition Stator |
|
KTM50 Complete Clutch Kit | |||
KTM50 Adventure aftermarket ignition coil assembly. Made to the same size, spec, performance, color and quality as the standard OEM part.
Will fit all model KTM50s, years 2002-2008 and newer. *NOTE- if you have a older KTM50 with black "Morini Franco" engine this will not fit. Any tech questions please email me or call. |
KTM50 Adventure Aftermarket ignition STATOR assembly. Made the same size, spec, performance, color and quality as the standard OEM parts.
Will fit all models KTM50s, years 2002+ and newer years. *NOTE- if you have a older KTM50 with black "Morini Franco" engine this will not fit. Any tech questions please email me or call. |
Made to the same spec, size, performance and quality as the standard clutch basket and springs.
Includes the following:
Clutch Basket with 360 degree weld. Clutch basket roller bearing. Complete 3-shoe clutch assembly with extra spring washer set and complete instructions for set up and maintainace
***IMPORTANT NOTE*** this clutch basket has a 360 degree weld around the center hole. - unlike the standard early models that only had spot welds. This makes our clutch basket very strong and reliable under the most extreme racing conditions.
|
||||||
| Part Image | Part No. | Part Description | MSRP | Your Price | |
 |
Ignition Cover |
Reg. Price $23.99 SALE $17.99 |
Currently out of stock, Please check back! | ||
 |
Carburetor PHVA - Standard Replacement, Complete Carburetor Assembly. | Reg. Price $179.99 SALE $89.99 | |||
 |
451.30.018.000 | Crankshaft Assembly | $175.35 | $99.99 | |
 |
Counter Shaft Bearings (Set of 2) | $25.99 | |||
|
|
Crank Shaft Bearings (Set of 2) | $25.99 | |||
 |
Engine Center Case Set | $169.99 | |||
 |
Clutch Cover | $49.99 | $39.99 | ||
 |
Intake Manifold | $39.99 | $21.99 | ||
|
451.30.051.044 | Reed Valve Block | $83.55 | $44.99 | |
 |
451.30.034.000 | Top End Bearing | $10.83 | $7.99 | |
|
|
Clutch Bearing | $9.99 | |||
 |
451.30.028.000 | Flywheel Nut | $2.25 | $2.25 | |
 |
451.30.099.000 | Complete Gasket Kit | $29.92 | $19.99 | |
 |
451.30.006.100 | Cylinder Head | $96.72 | $76.99 | |
 |
451.33.052.000 | Kickstart Sleeve | $26.45 | $20.99 | |
 |
451.39.005.000 | Flywheel | $89.98 | $69.99 | |
 |
451.32.024.0571 | Primary Gear | $66.04 | $52.99 | Currently Out Of Stock, Please Check Back! |
 |
451.39.006.000 | Kickstart Lever | $104.07 | $32.99 | |
 |
510.03.021.000 | Kickstart Return Spring | $5.47 | $3.99 | |
 |
451.33.050.000 | Kickstart Gear & Shaft | $56.57 | $49.99 | |
 |
Seal Kit | Engine Seal Kit | $61.33 | $19.99 | |
 |
19mm carb | $129.99 | $89.99 | ||
 |
Steering Kit | $35.99 | $25.99 | CURRENTLY OUT OF STOCK; PLEASE CHECK BACK | |
 |
Kill Button | $19.99 | $9.99 | ||
 |
Clutch Spring Washer Kit | $35.99 | $29.99 |
| 1994-2001 Models | |
 |
Carburetor - SHA 12/14 - For KTM50s, 1994-2001 only. Reg. Price $99.99 SALE $59.99 |
 |
Aluminum Float Bowl - SHA 12/14 Reg. Price $29.99 SALE $21.99 |
 |
Air Box Assembly - SHA 12/14 Reg. Price $25.99 SALE $19.99 |
 |
|
|
|